Sealing or not sealing is not the issue! When it comes to natural stone, that you have it sealed is an absolute must. From natural pavers and interior tiles, and counter tops of granite. If it’s stone, then it has to be sealed. Travertine and marble are also brittle stones dependent on calcium and are prone to stain and extra wear if not tightly sealed. That is one of the reasons that travertine and marble tile have gained a poor reputation. In some cases, the installer is unaware of the need to seal the stone with new construction, or even remodels. In these situations, the homeowner is not educating on how to preserve the stone, so it easily gets rusty or loses its luster, leaving the owner with a poor natural stone experience. This is a very expensive mistake, and occurs more often than you think. Don’t let that scare you away from using natural stone though. Stone tile sealing is simple to do and the area just needs to be completed every 2-5 years based on the traffic in the region in question. Checkout Natural stone sealer.
There are two stone sealer types; superficial, and penetrating. A topical sealer can secure the stone by forming a coating of defense at the rim. This type of sealer is not as effective as a penetrating sealer that will actually flash and penetrate the stone itself to prevent stains and moisture from flowing into the stone itself. So, make sure that this is penetrating and not topical when choosing your sealer. That is of course only the first step. There are many types of sealers that get penetrated. For example, there are sealers based on water, and sealers based on silicone. Water based sealers are ideal for areas like a pool deck or bathroom where the stone can get damp during sealing. If you use a silicone-based sealer and it gets wet before it dries it might leave the stone with a cloudy unattractive appearance. You may also use a silicon-based sealer everywhere as long as it has the opportunity to dry fully until it’s exposed to liquids.
Last but not least, there’s one more thing you have to decide. Sealers can change the way your stone looks once applied, so it’s important to know the look you ‘re looking for and get the right sealer that’s going to help you achieve that objective. If you like the appearance of your stone in the shop, you can purchase a natural stone sealer that will leave your stone looking normal or unsealed. If you like the stone as it is and don’t want it to darken in appearance after installation, this is a good option. If you like your stone but want some of the colors in the stone to come out and be more pronounced, you can use a semi-gloss / gloss sealer to give a slightly wet look to your stone and bring some of the colors out there. Be careful here; some are topical gloss sealers. Make sure that the one you are using is a penetrator / impregnator. Ultimately, a sealer with an enhancer used, is the perfect way to go if you want the stone to truly stick out. Enhancers will really pull out all of the stone’s gorgeous colors leaving a bright, elegant stone every day, rainy or cold.